Electric wire rope hoist procurement parameters
Order time: 2021.12.27
Lifting capacity: 10 ton
Lifting height: 12 meters
Working voltage: 380v/50hz/3p
Order content: 10 ton electric wire rope hoist
Exporting country: Paraguay
This is the order of electric hoist sold to Paraguay in 2021. The customer purchased 10 tons of metallurgical hoist from our crane factory. The order was placed in the factory on December 27, and the wire rope was confirmed on December 31. On January 7, 2022, the customer confirmed the use of steel core wire rope, and we will send the customer a set of rope guide. The order was sent to Paraguay on February 22, 2022. The atlas shows some details of metallurgical electric hoist in the factory. If you want to know more about metallurgical electric hoist and the latest price of 10 tons of metallurgical electric hoist, please contact us.

What is metallurgical electric hoist
Metallurgical electric hoist is a metallurgical wire rope electric hoist specially designed to transport molten metal or other high-temperature solid objects. It can not only be used as the lifting mechanism of electric single-beam, electric suspension, hoist double-beam crane and other lifting mechanisms that meet the use requirements, but also can be independently installed on fixed overhead rails. It is a safe and reliable light special lifting equipment for small and medium-sized metallurgical workshops.

Scope of application

It is applicable to the metallurgical industry and is used to transport molten metal.

Product advantages:

1. The highest working level of electric hoist is M6;

2. The hoist mechanism is composed of support brake and safety brake. When the cone motor brake fails or the intermediate drive fails, the DC electromagnetic brake installed on the high-speed shaft of the reducer or the ratchet brake on the drum starts to move. Brake heavy objects to avoid the danger of heavy objects stalling.

3. It has double limit and double limit function.

4. Start weight limit protection.

5. High temperature insulation protection function

6. The insulation level of the elevator motor and the working motor is Class H. The elevator motor winding is equipped with an overheat protection device.

7. The steel wire rope constitutes a high strength and high temperature resistant steel wire rope for the metallurgical base.

8. Control method gives priority to the remote control.

9. The working level of the product is M6, the protection level is IP54, and the insulation level of the motor is F, so the protective device must be prepared when it is used in the open air, and it is not suitable for use in places with relative humidity greater than 85%. In addition, CDY1/MDY1 metallurgical hoist will add a safety brake to be directly installed on the drum to achieve the safety of lifting products.

10 tons of metallurgical electric hoist sold to Paraguay in 2021